Introduction: Tea Bag Holder (Panda, Bunny and Monster Truck)

Do you have a trouble when you are making your own afternoon tea? Are you having trouble with the tea bag's train of thought? I think thither is a fun and great solution for this. We can utilize 3D printing process object to solve this trouble. I will render you how to make tea bag holder and the result is cool and howling. In this project, I made 3 different tea bag holders.

Supplies

Dremel 3D40 Printer

Blue, black, red, white, gold, and green filaments

Black Sharpie

Mugs (for display only)

Tea bags (for display only)

Newspaper publisher Clips

Hot glue and gun

Step 1: ​Ailuropoda melanoleuca

On that point are some stairs to pass wate tea bag holder with Panda. The result will atomic number 4 like this.

Step 2: Body

Drag and drop a sphere to the workplane. Pull in a measurement as follows:

Height: 21.67

Width: 27.23

Length: 33.06

Step 3: Head

For making the head, drag and drop second sphere to the workplane. The measurements are:

Height: 31.31

Width: 32.68

Length: 39.67

Set down it above the physical structure aside aligning both of them.

Step 4: Ears

To make the ears, drag and drop a round roof to the workplane. Scale it into height of 5mm, width of 4mm, and duration of 7mm. Put information technology into the head of the panda. Go around it 22.5 degrees to the left. Duplication and flip information technology to make the former side of ear. Align both of them. If you print on an individual basi, like I did, make a hole away victimisation the head of the panda itself, so that the ears will go nicely onto the manoeuver of panda.

Step 5: Muzzle

For the gag, retarding force and drop a sphere into the workplane. Scale it into the meridian of 9.63mm, the width of 9.36mm, and the distance of 15.87mm. Attach IT to the head.

Step 6: Nose

To make the poke, grab a sphere and scale it into the diameter of 3 mm. Put IT onto the muzzle.

Stair 7: Mouth

To draw the talk, tangle a round of drinks roof to the workplane. Scale it into the height of 3 mm, the width of 3 mm, and the duration of 7 mm. Duplicate it and go far into a cakehole. Scale IT into the height of 3.5 mm, the width of 3 mm, and the length of 7 millimeter. Group them together. Put the mouth to the gun muzzle. Rescale the height of 2 millimetre.

Step 8: Eyes

To realise the eyes, drag a sphere into the workplane. Scale information technology into the diameter of 5mm. Stick it to the channelize. Same and move it until you let the proper location for both eyes.

Step 9: Neck

To reach the neck, snap up a cylinder to the workplane and scale to the diameter of 20 millimetre and the height of 2 mm. Duplicate IT and make it a trap. Scale to the diameter of 19.23 mm and the height of 3 mm. Group them together. Put the make out to the body.

Step 10: Hands

Grab a paraboloid. Descale it into the pinnacle of 7 mm, the width of 7 mm, and length of 15 mm. Rotate it until IT is -15 degrees. Put it into the panda's body. Duplicate and tack information technology. Move it until it is symmetrical. Double the coon bear's organic structure and get in a hole. Group them conjointly.

Step 11: Bamboo

Grab a cylinder into the workplane. Scale the diam of 5mm and the height of 45mm. Go around to 45 degree. Stick information technology to the lesser panda's body. I add with asteroid shape for the outer side of meat of bamboo, but information technology is optional.

Step 12: Legs

Drag a sphere into the workplane. Scale the diameters of 9 millimeter. Put off it to the panda's body and duplicate the leg. Duplicate the panda's body and make water it a hole. Group the legs and the hole together.

Step 13: Printing Lesser panda

Save and exportation the Panda file to .stl file and print information technology, only for this time, print panda bear part past part of the body with different color. Choose threesome colors for the bear cat. I choose black, green, and T. H. White.

First, print the fountainhead. In the head, I included eyes, muzzle, nose, and mouth because they are gnomish parts so it is very sticky to print separately. Second, print the dead body. Close, impress the neck opening, hands, ears, legs, and lastly, bamboo.

Open the Dremel Digilab 3D Slicer. Make a point the object is connected the base. Choose the print setup.

I choose "medium prime", Infill: Gradual, Beat the build plate adhesion, and send to printer. I choose medium quality this time because spiky speed does not give a good leave for smaller object.

Abuse 14: Meet Panda

Gum all consistence part of panda one by one using hot glue gun. See the picture. Use a black Sharpie to draw the eyes, nose, and mouth.

Step 15: Bunny rabbit

In that location are few stairs to make tea bag holder with Bunny. The result volition constitute like this.

Step 16: Head

Drag in a sphere into the workplane. Scale it into the diam of 40 mm.

Step 17: Body

Hang back a rounded block into the workplane. Scale it into 32 mm in all faces. Grab a metafillet and make cant to the upper part of torso, so the personify is a little bit rounded. The mensuration of metafillet is shown in the envision. Impound the head to the body.

Step 18: Eyes

Get behind and drop-off sphere to workplane. The diameter of the sphere is 5 mm. Attach the eyes to the fountainhead. Parallel and move it until you get the right position for both eyes.

Measure 19: Gun muzzle

For the muzzle, drag and drop a sphere into the workplane. Scale it into the height of 6 mm, the width of 11 mm, and the length of 12 mm. Attach information technology to the channelize.

Step 20: Nose

To make the horn in, grab a roof and descale it into the tiptop of 2 mm and the breadth and duration of 4 millimeter each. Put it onto the muzzle.

Step 21: Mouth

Drag and drop tube to the workplane. Measure the to of 4.02 mm, the width of 3.01 mm, and the length of 5 millimetre. Drag a cylinder and wee-wee a hole of it. Cut IT into the shape like mustache. For the size, find the picture.

Step 22: Ears

Drag a paraboloid to the workplane for making the ear. Copy and flip information technology 180 degrees. Put away them together. Rotate 90 degrees. Shorten the breadth into 4.75 millimetre and make the length of 14 mm and height of 41 millimeter. Copy and resize IT into the breadth of 4.05 mm, the length of 11.95 millimetre, and the peak of 35 millimetre. Align them. Come through into a hole. Group them together. Stick the ears to the caput of the bunny. Duplicate the auricle. Put off it onto the other side.

Step 23: Legs

Drop behind a sphere into the workplane. Scale the diameters of 9.12 millimeter and the height of 14.60 mm, so it looks comparable an ellipse. Put information technology to the bunny's consistence. Impart three more half sphere to get ahead toes. For the dimension of toes, ascertain the pictures. Rotate the toes until the flat parts face to the body. Duplicate the pegleg and toes. Attach them to the body.

Step 24: Hands

Drag and drop sphere to the workplane. Make the sphere become ellipse with the size:

Elevation 5.54 mm

Length 15.47 mm

Width 7.68 millimeter

Rotate 22.5 degrees vertically and 33 degrees horizontally. Make a copy. Stick it to the bunny's body. You created two hands.

Step 25: Daucus carota sativa

For fashioning a carrot, drag and drop curtain a paraboloid and affection to the workplane. Make the size as shown in the pictures.

Step 26: Printing Bunny

Save and export the Bunny rabbit file to .stl file and publish it, just for this time, print bunny part by depart of the body. Choose two colors for the bunny. I choose dreary and red.

First, print the nou. In the head, I enclosed eyes, muzzle, nose, ears, and mouth off because they are small parts so information technology is very difficult to print separately. Second, print the body. In the body, I included legs and hands. Finally, publish cultivated carrot.

Open the Dremel Digilab 3D Slicer. Make sure the objective is on the base. Choose the print setup.

I choose "medium quality", Infill: Gradual, Check mark the build plateful adhesion and suffer, and send to printer.

Step 27: Assemble Bunny rabbit

Glue all body part of bunny rabbit one aside one using white paste gun. See the movie. Employment a lightlessness Card sharp to draw the eyes, nose, and mouth.

Step 28: Glassful Lid

To make glass lid, drag and drop cylinder to the workplane. Shell information technology and spend a penny hole in the center. For the grading, imag the pictures. To make the glass lid even prettier, you need to do backtalk by using another cylinder and make it a hole. Group them together until you cause same in the picture. In addition, make a gap in the lid for inserting the Camellia sinensis bag's thread. Grab a box, work it a hole. Align and mathematical group information technology with the lid.

Step 29: Printing Looking glass Hat

Save and exportation the glass lid file to .stl charge and black and white it.

I ingest Dremel 3D Printer 3D 40. First, open the Dremel Digilab 3D Slicer. Make sure the object is on the base. Choose the print frame-up.

I choose "high stop number", Infill: Easy, Tick the build plate adhesion, and send to pressman.

Step 30: Monster Truck

There are roughly steps to make tea bag holder with monster truck. The result will be like this.

Step 31: Wheels

Drag and drop a cylinder to the workplane. Make a measurement as follows:

Stature: 16.20 mm

Width: 10.99 mm

Length: 16.20 mm

Drag and drop other piston chamber to the workplane. Make a measurement as follows:

Height: 14.09 mm

Width: 19.17 mm

Length: 14.09 mm

Make IT a hole. Align and radical them. Drag and knock off a wheel. Scale information technology to the diameter of 24.29 mm and the width of 11.34 mm. Grab a cylinder. Scale information technology into the diam of 16.20 mm and the width of 11.90 mm. Align and group them together. Put the rim to the tire. Aline them. For the tire threads, use box from the shape computer menu and the size is 5 mm of distance, 2 mm of height and 5 mm of breadth. Rotate it 45 degrees. Copy and flip it. Group them together. Copy them once, and after that, make forward copy about the wheel for 14 times.

Step 32: Frame

Hold the couc aside grabbing a box. Scale information technology into the height of 13.77 mm, the width of 17.82 mm, and the length of 55.06 mm. Grab a wedge. Make IT a hole and scale it into the height of 32.39 millimetre, the breadth of 23.48 millimetre, and the distance of 32.39 millimeter. Twin and somersaultin it horizontally. Group them with the shape. See the picture. Puff other submarine. Scale it into the height of 7.29 mm, the width of 76.12 millimetre, and the length of 8.10 mm. Too, drag a box and scale it into the height of 7.29 millimeter, the width of 68.02 mm, and the length of 14.58 mm. Duplicate the wedge. Flip and make them holes and group them together with the frame.

Step 33: Axle

For the axle, drag and drop a cylinder. Make the size of the piston chamber 10 mm diameter and 1.62 millimeter width. Copy 3 times, so you have 4 axles in full. Suspend.

Step 34: Dead body-Pt.1

Drag out and drop a box to the workplane. Scale IT into the width of 23.62 mm, the length of 64.78 mm, and the acme of 10.66 mm. Take in the wheel spoke of 3. Drag out round roof and make the duration of 11.27 mm, the breadth of 37.12 mm and the height of 4.79 mm. Copy to the another sidelong of the boxwood and nominate them holes. Group the holes and the dead body together.

Step 35: Punk of the Torso

For the hood, sweep up and drop box. Make the radius of bevel 3. Scale the box with the length of 20.77 millimetre, the width of 21.05 mm, and the meridian of 3.24 mm. Drag a bulbous roof to the workplane. Scale it with the length of 3.11 mm, the width of 21.05 mm, and the summit of 6.48 millimeter. Mathematical group information technology with the goon. Get to a hole using a box with length of 22.97 mm, width of 21.20 and the height of 19.44 mm. Cast it along the middle- top of the consistence. Group it with the body.

Footfall 36: Body- Pt.2

Keep going to make the body of monster motortruck. Drag and fall box to the workplane and put IT in the middle of the dead body to make passenger compartment tub. Do a hole and group them together.

Step 37: Trunk

For the luggage compartment of monster hand truck, drag and drop box to the workplane. Scale information technology with the size of it as follow:

Duration: 21.05 millimetre

Width: 19.44 mm

Altitude: 32.39 mm

Make sure information technology passes to the bottom. Ready it a fix. Group them together.

Step 38: Seat

For seat, exercise 2 boxes. Make them 90 degrees angles for each other. For the shell, see the pictures.

Tread 39: Abundant

Drag and driblet a box. Make the radius of 3. Scale it Eastern Samoa shown in the picture. Drag and throw some other box. Make it a hole and scale it as shown in the impression. Group them together. See the picture.

Step 40: Bearer

For bearer, drag and deteriorate a box to the workplane. See the word picture for the measuring. Copy it, so you have 2 pieces of boxes.

Step 41: Truck's Cab

To micturate the truck's taxicab, you will need to drag 4 boxes into the workplane. Scale and aggroup them as shown in the pictures. The cabriolet's roof need to be beveled by using 3 metafillet and make them holes. For the windscreen, usage 2 wedges. Make one of them as a hole and grouping them together.

Step 42: Printing Demon Truck

Save and export lodge to .stl Indian file and print IT, simply for this time, print monster truck part away region of the body with divergent color. Choose three colors for the panda. I choose black, common, blank, and red.

Forward, print the wheels, frame and axles. Next, print the body. In the body, I enclosed hood, tree trunk, seat and abundant because they are small parts so it is very difficult to print individually. Tardive, print the trucks' hack and lastly, holders.

Open the Dremel Digilab 3D Slicer. Make sure the targe is on the base. Prefer the print setup.

I choose "medium quality", Infill: Gradual, Tick the fles plate adhesion, and send off to pressman. I choose culture medium quality this time because high pelt along does not give a good result for smaller object.

Step 43: Gather

Gum whol hand truck parts one by indefinite using hot mucilage. Escort the picture. Finally, glue a paper clip to make truck's hook shot for hooking the tea bag's meander.

Step 44: Finished!

The cast is finished! It is Fantastic, right? At once you can let fun while making your own tea! I hope you like and enjoy it.

Thank you for reading my Instructable.

For more project idea, visit 3D Impression Nitty-gritty.

Be the Initiatory to Share

Recommendations

  • Anything Goes Contest 2022

    Anything Goes Contest 2022